Sentence examples for static ratio from inspiring English sources

The image content complexity will definitely impact on the results produced when compressing images with a static ratio.

Carson broadened the radio engineers' concept of signal-to-static ratio to a more general signal-to-noise ratio and introduced a figure of merit for noise.

Then, seven jet nozzle aspect ratios and seven jet nozzle to chamber cross section area ratios are selected to research the flow field and thermal characteristics of vortex cooling focusing on the streamline, static pressure ratio, total pressure loss ratio and Nusselt number.

This study also revealed that combination values of gravity and spring parameters although resulting in similar values of the static eccentricity ratio exhibited remarkably different bifurcation behavior.

This allowed evaluating the capability of the two different "static" swirl ratio definition (AVL/Ricardo) in correctly estimating real engine swirl.

The objectives were to minimize the cascade total pressure losses and to maximize the static pressure ratio using a Pareto ranking criterion.

Results showed that loss coefficient could be reduced by 25% and the static pressure ratio could be improved by 6.5% as a results of a decrease in the pre-shock Mach number by virtue of an extended pre-compression mechanism that involves the entire suction surface upstream of the passage shock.

The geometry considered was an S-shaped 2D cascade developed and tested at DLR (DLR-PAV-1.5), operating under unique incidence and inlet Mach number equal to 1.5 so as to develop approximately a static pressure ratio of 2. In such conditions, the cascade shows a strong lambda shock-boundary layer interaction.

This implies that the variations in the nonlinearity parameter ratios increase with temperature to a significantly higher degree than the variations in the strength ratios and static elastic modulus ratio.

A fairly simple transmission model is used which is based on static gear ratios assuming small shift times.

Further, the roles of isolator parameters such as the static stiffness ratios, shape factors and material properties are investigated.