Your English writing platform
Discover LudwigSuggestions(1)
Exact(34)
Using a lower starting temperature of the xenolith, results in a predictably longer xenolith melting time.
The starting temperature of the transformation decreases with increasing cooling rate.
Phase diagram in the inter-critical temperature was estimated for the steel to obtain the starting temperature of fast cooling.
In order to enhance transformation-induced plasticity, alloys with low stacking-fault energy and high starting temperature of ɛ martensite Ms should be looked for.
The results show that a minimum starting temperature of 152 °C and 63.8 W electric power are required to initiate the decrease of evaporation temperature.
The addition of CNH, CNB, and CB elevated the starting temperature of thermal degradation of PLLA, whereas the addition of SWCNT reduced the thermal stability.
Similar(25)
Linear relationships between the starting temperatures of η∗, G′ and d.s.c.s.c
It is found that the composite with SMA fibers can have a large transformation temperature range during the heating process, and a linear shrinkage may take place during the cooling because of the large difference between the austenite finish and martensite start temperatures of the composite.
Slow heating up to start temperatures of the reverse transformation caused non-recoverable changes in the original orientation of the austenite lattice as it was in case of rapid heating of quenched alloys to these temperatures.
Hsu and his collaborators successfully predicted the start temperatures of martensitic transformation (M s ) in Fe-C, Fe-X, and Fe-X-C alloys by the thermodynamics theories and believed that applied stress, as a driving force, could promote martensitic transformation and thus elevate M s [26 29].
So, like the starting temperature, the number of random sites has to be determined in an ad hoc manner.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com