Your English writing platform
Discover LudwigSuggestions(5)
Exact(7)
Start of ignition.
The start of ignition of the second-stage combustion is linear with the start of ignition of the first-stage.
Combustion effects were limited but changes in the start of ignition and heat-release rate could be identified.
These results showed that the use of biodiesel at high altitude advanced the start of ignition and reduced the proportion of the premixed combustion stage.
Homogeneous charge compression ignition (HCCI) combustion mode provides very low NOx and soot emissions; however, it has some challenges associated with hydrocarbon (HC) emissions, fuel consumption, difficult control of start of ignition and bad behaviour to high loads.
Emission tests were carried out on a large-scale medium-speed supercharged diesel engine (∼1 MW per cylinder) with control parameters compression ratio, start of ignition (SOI) and fuel type (light and heavy fuel oil, LFO and HFO).
Similar(52)
The cut on the electrical current of the spark plug is obtained in two ways: defining the cut_off delay between the start of the ignition spark and the intervention of the traction control, as shown in Figure 8, and defining the number of consecutive ignition sparks for which the traction control takes action, an example is shown in Figure 9.
This article investigates the basic combustion parameters including start of the ignition timing, burn duration, cycle-to-cycle variation, and carbon monoxide (CO), unburned hydrocarbon (UHC), and nitric oxide (NOx) emissions of homogeneous charge compression ignition (HCCI) engines fueled with primary reference fuels (PRFs) and their mixtures.
The explosion experiments were carried out with changing tign the time of ignition after the start of dispersion, P0 the initial hydrogen pressure, and d the opening (nozzle) diameter.
This includes looking for sources of ignition that could start a fire, flammable materials or chemicals that can cause fires.
To minimise the influence of oxidation all samples were handled at inert conditions until shortly before ignition or start of the test respectively.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com