Sentence examples for start combustion from inspiring English sources

Diesels inhale a higher proportion of air and squirt less fuel directly into the spot where it will be burned, relying on the heat of compression to start combustion.

This paper aims to analyze the influence of the glow plug configuration (location and temperature) on cold start combustion.

HCCI engines however do not have any direct control on the start of combustion timings, which makes HCCI combustion control extremely challenging.

Experimental mass fraction burned profiles fitted using the Wiebe's function revealed that the burning rate at the start of combustion is rapid for ISB30 followed by PEN30, HEX30, OCT30 and ULSD.

Combustion images were captured at different engine loads to determine start of combustion (SoC), spatial soot distribution and spatial flame radiation temperatures.

From these the angle of start of combustion has been obtained.

The model performance was assessed based on key metrics: start of combustion; peak heat release and point of peak heat release and cylinder pressure.

For the start of combustion, a system bias is adopted to correct the deviation and the error bound of the predicted parameters is within 1.1°.

Temperature and mixture stratification are regarded as effective means of controlling the start of combustion and reducing the abrupt pressure rise at high loads.

As an approach to replace pressure transducers, ion current sensing is a promising candidate for overcoming the difficult task of controlling the start of combustion in Homogeneous Charge Compression Ignition (HCCI) engines which require feedback from previous cycles.

The jet ignition pre-chamber is a small volume that is connected to the in-cylinder through calibrated orifices accommodating another fuel injector and a glow or a spark plug that controls the start of combustion.