Sentence examples for standard thickness from inspiring English sources

Another, armed with a Thor-size tenderizing mallet, pounds them into standard thickness.

Boffi's extra-chunky stainless steel counters are almost twice the standard thickness, and, at almost $7,000, cost roughly twice as much as stainless counters from commercial kitchen supply stores.

"On higher-end doors, the standard thickness is 2 1/4 inches, and the doors usually have raised details or intricate hand carving," he said, adding that such a door, which is often framed by a series of leaded, etched or stained-glass windows or sidelights -- strips of glass along the side of the door -- could cost $12,000 or more installed.

The standard thickness for a barrier layer is between 150 and 300 nm [20].

A Gaussian distribution approximation is depicted in bold, whereas a line following a lognormal distribution is of standard thickness.

The objective of the investigation is the comparison of standard thickness Fibre Reinforced Plastic layers versus thin-ply material technology.

Selection of timber, already passed through the seasoning kiln and converted to standard thicknesses, follows.

Using the developed analytical method, a new series of standard-thickness glass/thin-ply carbon hybrid composites was tested and a very good pseudo-ductile tensile response with 1.0% pseudo-ductile strain and no load drop until final failure was achieved.

Upright storage might look better on a bookshelf but standard-thickness cards will warp in an arc over time.

Figure 16 shows a cross section of the composite coating with a standard total thickness of 750 μm (30 mil).

The wall thicknesses are chosen for each investigated diameter based on strength design and rounded off to the next available standard wall thickness according to the API-standard.