Sentence examples for stack composed from inspiring English sources

We developed an MRI compatible PET detector stack composed of two main assembly groups, called sensor tile and interface board.

In particular, a 3D analysis of the whole stack composed by 120 channels and 10 cells was carried out.

Two endplates are used to fasten a proton exchange membrane fuel cell (PEMFC) stack composed of gaskets, gas diffusion layers (GDLs), membrane electrode assemblies (MEAs) and bipolar plates.

IEEE 802.15.4 consists of a very small stack composed of the physical and Medium Access Control MACC) layers, a simple design regarding interoperability, a long battery life scheme, and a low rate (250 kbps at 2.4 Ghz) transmission.

Nowadays, the above intermediaries are not anymore required for communication between motes and the Internet, thanks to the standardized stack composed of IEEE802.15.4 and 6LoWPAN, which is intended to replace proprietary communication proxies (application level) by standardized IP routers (network level) [15].

A precursory stack, composed of magnetron-sputtered Al top-layer, microarc-oxidized TiO2 interlayer and pure Ti substrate as bottom-layer, was used to fabricate oxidation-resistant coatings via reactive synthesis method that involves a vacuum-diffusional annealing at 600 °C and a following pre-oxidation treatment at 900 °C.

An example of this is the delamination of the phosphorus doped silicate glass (PSG) from the high density plasma (HDP) layer of the HDP/PSG film stack composing the PMD level.

We demonstrate for the first time the embedding of a multi-stack composed of Au/SiO2/Au nanosheets in PDMS and discussed in details the influence of each process parameters on the nanosheet composition and dimension.

In the second step, the pressure drops are measured for stacks composed of eight different woven screens (of plain dutch type) formed with millimetric wires.

Very often, multi-layer etch mask stacks composed of carbon-containing material, such as amorphous carbon or spin-on-carbon (SOC), and a few other material layers are widely applied in currently standard semiconductor nanofabrication [13, 14].

To evaluate the corrosion protection, an adapted calcium mirror test based on water droplet permeation was developed, and the water permeation of conventional parylene-C layers (4.5 μm) was compared to multilayer stacks composed of 3 SiOx interlayers (4.7 μm).