Sentence examples for stabilizing accuracy from inspiring English sources

The average stabilizing accuracy as measured in the thermostat liquid was ± 0.1°C.

This article presents a novel method to measure unbalanced moments in a two-axis gimbaled seeker commonly believed to seviously influence the tracking accuracy and stabilizing capability.

As more scanned RSS data are used (i.e., greater than four), the accuracy stabilizes at around 2m. Figure 5 Baseline system accuracy, without user feedback.

After ≈20,000 steps, with a learning rate decreasing from 0.15 to 0.01, the training accuracy stabilized at 99.9%.

Moreover, several tens of minutes are usually required for a regional network before a narrow-lane UPD estimate stabilizes to an accuracy of far better than 0.1 cycles.

In this paper, a hue preservation based color space is designed to replace RGB space and to stabilize the tracking accuracy for tracking algorithms in case of severe brightness variation.

During these missions, the attitudes of small satellites should be stabilized to a higher accuracy to obtain accurate science data and images.

The anodization process was carried out in a PVC cell cooled by a circulating system (Thermo Scientific, Waltham, MA, USA) with continuous stirring, which ensured a stabilized temperature within an accuracy of less than 0.5°C.

A trigger-timing signal distribution system of the injector linac was newly developed and extended for stable injection to the KEKB rings with the required injection-timing accuracy highly stabilized to less than 30 ps in root mean square because the old trigger system distributed the trigger-timing signals for the injection to the PF ring and the PF AR with an injection-timing accuracy of 300 ps.

The numerical applicability and accuracy of the method was further validated by analysis of the stabilizing process for the stress-erection of different Strarch models.

The only task that allowed for clear speed-accuracy tradeoffs in this experiment was that of reaching a determined myoelectric amplitude with the goal of stabilizing the signal at this level i.e.e