Sentence examples for stability of films from inspiring English sources

Temperature measurements prove the thermal stability of films and nanodots in an application relevant temperature range.

Finally, the stability of films was determined by x-ray photoelectron spectroscopy (XPS) measured before and after the photoelectrolysis.

The ordering of atomic bonds and stability of films in the ambient condition were varied with substrate temperatures.

Molybdenum disulfide (MoS2) and diamond-like carbon (DLC) films used currently as lubricant films for various applications may exhibit severe limitations related to the stability of films in oxidizing or humid atmosphere.

The stability of film microstructure upon annealing at 600 °C in a vacuum has been studied by transmission electron microscopy and electron diffraction.

The preliminary testing results indicate that the increase of La precursor pulse can improve the characteristics of film, which has significant effects on the dielectric constant, equivalent oxide thickness (EOT), electrical properties, and stability of film.

To investigate the thermal stability of the films, undoped and Al-doped ZnO films were annealed at 350°C in Ar, N2, and air ambient for 20 min, separately.

Moisture stability of the films was tested by exposing the PVSK films under relative humidity of 80±5%5% and room light.

As a consequence, the stability of SRO films increases from high energy, more defective films with the (110) and (111) orientations to the highly ordered, low-energy (001) film.

With increased silicone content, the roughness, hydrophobicity, and thermal stability of the films were enhanced, but the transparency of the films in the 300 800 nm region was decreased.

The thermal stability of perovskite films is an important factor for their possible application in LEDs.