Sentence examples for ss characteristics from inspiring English sources

Numerical simulation shows that the drive current and subthreshold swing (SS) characteristics of GaAsBi/GaAsN hetero-TFETs are remarkably improved by increasing Bi and N compositions.

As the Ga composition increases, the average SS characteristics of HE-NTFETs are improved, while the drive current of devices is reduced due to the increasing of tunneling barrier.

As shown, the SS characteristics of SB-MOSFETs are almost compatible with ultimately scaled DG-MOSFETs.

Also, short channel characteristics of SB-MOSFETs are analyzed using drain induced barrier lowering (DIBL) and subthreshold swing (SS) characteristics.

As analyzed in Fig. 3, most of the trap states contribute to Frenkel-Poole emission which causes the degradation of DIBL and also SS characteristics in SB-MOSFETs.

Thus, the control of the interface trap states in SB-MOSFETs are the important key factor for the improvement of DIBL and SS characteristics.

The Koine replaced the Attic tt with the ss characteristic of Ionic and other dialects (e.g., glōssa for glōtta 'tongue') at an early date, but its main phonological characteristic is the gradual simplification of the rich vowel system of Classical Greek.

We observed no statistically different BC-SS characteristics for IBC patient cases based on HER2 receptor status at the time of diagnosis on unadjusted analysis, and a borderline significantly improved survival for patient cases with HER2+ tumors in the BC-SS adjusted analysis.

It was concluded that the snow accumulation and ablation process in the catchment had a significant impact on SS runoff characteristics especially during the snow-melting period.

(A) Original SS shows characteristic absorptions of protein including amide I (1,700 to 1,600 cm−1, asterisk), amide II (1,560 to 1,500 cm−1, asterisk), and amide III (1,300 to 1,200 cm−1, asterisk).

The paper aims at determining the more appropriate regeneration operation (filtration, centrifugation) by modelling and simulating coupled regeneration CIP process on industrial assumptions and at designing and sizing the coupled CIP process according to the required physicochemical characteristics (SS, γ, COD) and cost.