Sentence examples for spring modulus from inspiring English sources

Electro-thermal loadings on the transverse free vibration of double walled boron nitride nanotubes (DWBNNTs) embedded in an elastic medium were considered by Arani et al. [9], who investigated the influence of spring modulus, shear modulus, electric field, and temperature change on the natural frequency.

Intra-animal (paired) comparisons between repair tissue treated with 1-year old MSCs and repair tissue treated with 4-year old MSCs resulted in no significant differences (α = 0.05) in material properties including maximum stress (10.8 MPa vs. 9.9 MPa; p = 0.762), modulus (139.8 MPa vs. 146.2 MPa; p = 0.914), and strain energy density (0.52 N mm/mm3 vs. 0.53 N mm/mm3; p = 0.966).

Highlighted in bold are the cases which cannot be implemented relying on a 1024-bit modulus, which is a standard in several cryptographic applications.

Others indicated that RA concrete has very similar flexural behavior with virgin aggregate concrete Malešev et al. (2010), Xiao et al. (2012b), Chen et al. (2010), Limbachiya et al. (2004) Modulus of elasticity Modulus of elasticity is greatly reduced by the use of recycled aggregate; it can reach 45%% of the modulus of elasticity of corresponding conventional concrete.

Table 1 Material properties for concrete Compressive strength (Mpa) 30 Density (kg/m3) 2400 Dilation angle 30 Eccentricity 1 Initial equi-biaxial compressive yield stress to initial uniaxial  Compressive yield stress, fb0/fc0 1.16  Bulk modulus, K 0.666  Modulus of elasticity, E (N/m2) 2.7386E10  Poisson's ratio, ϑ 0.17.

Absolute density (g/cm3) 2.68 Sand equivalent  Visual 77.45  Piston 74.00 Fineness modulus 2.63.

The HPLA and HPLAAT showed excellent ductility with strain to failure from 158.9%to42.7%7% and modulus from 265.2 to 758.2 MPa.

The highest fc of 0.996, tensile modulus of 14 GPa, and strength of 900 MPa were obtained by ultradrawing with DR = 50 at 155 °C.

The CFRP jacket was assumed to have a tensile strength of 3800 MPa, modulus of elasticity of 227 GPa, and a rupture strain of 1.67 %.

Therefore, as declared in the report (ACI Committee 363R 2010), the modulus of elasticity of high strength concrete is highly dependent on the coarse aggregate volumes and characteristics.

The samples were placed in a luminometer (LUMAC Biocounter M2500 or Modulus microplate, Turner Biosystems) and light output was determined over a 10 second interval.