Sentence examples for spray temperature from inspiring English sources

Fully crystalline mannitol was produced when the feed spray temperature was elevated leading to rapid supersaturation.

The hardness and density of the coating increase with the spray temperature.

Under all conditions, the average spray temperature was significantly above the steel liquidus temperature indicating most droplets were fully molten.

The phase content and grain size of the coating also exhibits a strong dependency on the spray temperature.

Substrate temperatures during spraying were maintained at a low level by controlling the upstream, cold spray temperature and robot movement.

The effects of spray temperature and traverse speed on particle penetration, sample weight gain and polymer deformation were investigated.

The effect of the volume fraction of Al2O3 particles and KM spray temperatures on the microstructure, hardness of the composite coatings, the deposition efficiency, and the bond strength between the coating and substrate was studied.

For the practical engineering usage, the spraying temperature and nozzle speed should be adjusted synchronously based on Froude number.

Cold gas dynamic spray, or simply cold spray, is receiving increased attention during the last years because of the lower spraying temperature required to deposit metallic coatings.

The influence of the process parameters atomization pressure and spraying temperature on particle size and process yield was investigated by experimental design.

We varied the spraying temperature and the type of substrate in order to show the technological conditions that play an important role in determining coating quality.