Sentence examples for spray mode from inspiring English sources

Typically, the spray mode of burning is considered as more severe than the pool model of burning.

This work evaluated the effects of spray mode, spray rate and atomizing pressure for spray granulation of drug nanosuspensions through a systematic study.

For a stable process the applied spray mode has caused a short arc and symmetric central drop transfer while for high voltage the arc became long and wide and the drops traveled sideward.

It was found that the spray mode had the most drastic effect, where top spray yielded smaller re-dispersed particle sizes and faster release rates of drug from granules than bottom spray.

Peptide samples were first desalted through a Zorbax 300SB-C18 peptrapstrAgilentilenTechnologieses, Wilmington, DE) and then separated by a 0.15 mm RP-C18 (RP-C18) Column Technology Inclogy Inc, Fremont, CA) with micro spray mode.

Perhaps most importantly, the four primary variations of GMAW have differing shielding gas flow requirements for the small weld pools of the short circuiting and pulsed spray modes, about 10 L/min (20 ft³/h) is generally suitable, whereas for globular transfer, around 15 L/min (30 ft³/h) is preferred.

At normal spraying mode complete decomposition of the solid lubricant occurs during spraying.

The formation of splats was analyzed to determine the optimal spraying mode.

The stable spraying mode was realized in a short gun barrel thanks to the formation of a stratified explosive charge by means of precise computer-controlled supply of the gas components.

A solution of 50% methanol containing 0.1% formic acid was supplied through this ion source at a rate of 750 nL/min and electrosprayed in the cone-jet spraying mode for the most efficient ion generation in the microflow regime.

The electro-spraying process of ethanol is visualized and four typical spraying modes are identified.