Sentence examples for splitter ratio from inspiring English sources

Thermoeconomic results show that, reducing the splitter ratio of the brine re-circulation flow rate from 0.5 to 0.25 while the compression ratio is specified by 1.15, the unit product cost decreases to 1.21 $/m3.

The chromatographic conditions were: injector temperature exceeding 250°C initial temperature of the furnace equal to 60°C, rate of variation of oven temperature of 10°C/min final temperature of the furnace equal to 280°C, helium gas was used as phase mobile (1 mL/min); Splitter ratio equal to 1 60; DB-5 column (30 m × 0.257 mm × 0.25 mm).

Then it was optimized alternately by simplex and conjugate graduate algorithm, a beam splitter with splitting ratio R T = 50 50 at this two wavelength was gained.

By employing a specific wavelength of 1570 nm, the polarizer behaves as the polarization beam splitter with extinction ratio for the transverse-electric mode and the transverse-magnetic mode of 29dB and 24 dB, respectively.

Data splitter take the ratio of (80 20) of (Train: Test) subsets.

This has two additional benefits: A long (f_{B}) improves the polarizing beam splitter's (PBS) extinction ratio since it reduces the divergence of the impinging beam within the PBS.

Based on this consideration, we fabricated a polarization splitter with a TE extinction ratio of 15 dB and TM extinction ratio of 21dBB.

A high extinction ratio polarization beam splitter based on multimode interference coupler has been obtained on silicon-on-insulator.

After the illumination system, two object and two reference beams are recombined into a single mode fiber with a beam splitter having a 99/1 splitting ratio.

Unlike in the heterodyne interferometer, object and reference beams are further divided into two orthogonally polarized object and reference beams, respectively with a beam splitter having a 50/50 splitting ratio.

The average SNR of received signal at information receiver of the node D from the node R. The average SNR of received signal at information receiver of the node R from the node S. The average SNR of received signal at information receiver of the nodeD from the node S. The ratio of power splitter.