Sentence examples for splice loss from inspiring English sources

Usually the additional splice loss induced by the collapse of air holes is too large.

This method guarantees high-strength fusion splicing between the two types of fiber with a low splice loss.

Further, inclusion of length independent splice loss modified this conventional FOM to a slightly lesser value of modified FOM.

Notably, the splice loss with standard telecom-grade SMF-28 fiber is considerably minimized through an improved mode-matching of the design.

We show how the linear properties such as spot size, numerical aperture, splice loss and bend loss can be controled by changing the air hole size.

Further, we make comprehensive numerical analysis related to splice loss issues arising from joining PCF with PCF and single mode fiber as well.

The output power (Pout) and the corresponding transmission value were corrected from splice losses and from characteristics of wideband coupler placed just before the EDF in the experimental setup [23].

These can only be achieved via optimization of all the Yb fiber parameters, ranging from the core background losses to the geometrical properties, in order to reduce the splice losses within the cavity,.

Splicing conventional single-mode fiber to large-hole small-core SCFs is particularly challenging, and while this has been demonstrated for core diameters as small as 2.5 µm with splice losses reported to be 1.55 dB [ 25] and 3.09 dB [ 26], these core diameters are up to five times larger than the optimum core diameter for sensing [ 16].

Fiber design rules as well as influences of higher-order dispersion and splicing loss are discussed.

The dispersion coefficient of the DCF at 1550 nm reaches -150 ps/nm/km and the splicing loss between the DCF and the SSMF decreases to 0.7 dB.