Your English writing platform
Discover LudwigSuggestions(5)
Exact(54)
Rotor speed was set at 83 rpm and operated at three paddle submergence settings: 7.6, 12.7, and 17.8 cm below the water surface.
The crosshead speed was set at 10 mm min−1.
Initial speed was set at 8 km/h with increments of 0.5 km/h per minute.
The computational results show that when the speed was set at 5 r/min, the bearing's maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate.
Interestingly, the overweight and normal-weight groups did not differ at any time point in terms of the speed of the treadmill that they selected (and, of course, nor did they differ when the speed was set at a level 10% higher).
Scan speed was set at 2 Hz.
Similar(6)
In Version 7.1, Autosteer is restricted on residential roads without a central reservation, while maximum speed is set at around the posted limit.
In the simulation, the cutting speed is set at 200 m/s.
The mixing time, temperature, and screw speed were set at 5 min, 280 °C, and 45 rpm, respectively.
In this module, the vehicle speed is set at level 1 at the road portion of the CS if it is going to be charged in order to reflect the real condition.
The geometrical and the operating variables which are regarded as the baseline case in this study are listed in Tables 1 and 2. In this case, the rotational speed is set at 30 rpm; the absorber and the cooler temperatures are set at 70°C and 20°C, respectively.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com