Sentence examples for speed of the samples from inspiring English sources

The coatings reached 15 μm thick, consisting of multilayers of different periodicities (4 nm ≤ Λ ≤ 20 nm), which were achieved by varying the rotating speed of the samples in a 2-fold rotation table.

Thus, in order to compensate for the expected nonlinear growth kinetics and arrive at a continuous variation of particle diameter across the substrates, we varied the dipping speed of the samples accordingly.

The speed of the sample stage was set to be 0.1 mm/s.

The applied load ranged between 5 and 80N using a rotation speed of the sample of about 200 rpm.

The ×1 option was selected, such that the slower the scanning speed of the sample, the greater will be the details of the fringes of the bracket slot floor as shown in Fig. 4.

In fact, finishing a CT in one respiration phase is possible but the rotation speed of the sample stage and the time resolution of the detector need to be improved [27].

Theoretical speed of the analysis in such a modular tool is only limited by the speed of the sample analysis in the different instruments and the speed of transfer of the remaining part of the sample from one mass spectrometer to another.

DART parameters were as follows: ionizing gas helium (purity≥99.999%) at 2.8 L/min and 350 °C; grid voltage +150 V; discharge needle voltage +350 V; distance between the DART orifice and the ceramic tube 4.5 cm; and sliding speed of the sample acquiring module 0.4 mm/s.

Both MS parameters (DP and CE) and DART parameters (choice of nitrogen or helium as ionizing gas, ionizing gas temperature (250, 350, 450 or 550 °C), grid voltage (+100, +150, +250 or +350 V), distance between the orifice of the DART source and the ceramic tube (45, 75 or 95 mm), and sliding speed of the sample acquiring module (0.2, 0.4, 0.6 or 0.8 mm/s) were optimized.

When scanning a field of 15 x 15 mm, this results in a scan speed on the sample of >20 m/s for the fast axis and ~19 mm/s for the slow axis.

The shear modulus of the core showed maximum influence on the wave speeds of the samples, while cell size did not have a significant influence on the wave speeds or on the transmission loss.