Your English writing platform
Discover LudwigSuggestions(5)
Exact(7)
The applied load ranged between 5 and 80N using a rotation speed of the sample of about 200 rpm.
The speed of the sample stage was set to be 0.1 mm/s.
The ×1 option was selected, such that the slower the scanning speed of the sample, the greater will be the details of the fringes of the bracket slot floor as shown in Fig. 4.
In fact, finishing a CT in one respiration phase is possible but the rotation speed of the sample stage and the time resolution of the detector need to be improved [27].
Theoretical speed of the analysis in such a modular tool is only limited by the speed of the sample analysis in the different instruments and the speed of transfer of the remaining part of the sample from one mass spectrometer to another.
DART parameters were as follows: ionizing gas helium (purity≥99.999%) at 2.8 L/min and 350 °C; grid voltage +150 V; discharge needle voltage +350 V; distance between the DART orifice and the ceramic tube 4.5 cm; and sliding speed of the sample acquiring module 0.4 mm/s.
Similar(53)
When scanning a field of 15 x 15 mm, this results in a scan speed on the sample of >20 m/s for the fast axis and ~19 mm/s for the slow axis.
The coatings reached 15 μm thick, consisting of multilayers of different periodicities (4 nm ≤ Λ ≤ 20 nm), which were achieved by varying the rotating speed of the samples in a 2-fold rotation table.
Thus, in order to compensate for the expected nonlinear growth kinetics and arrive at a continuous variation of particle diameter across the substrates, we varied the dipping speed of the samples accordingly.
Through changing the moving speeds of the sample chamber during PCR, the required reaction time is achieved at three reaction regions.
At the same crosshead speed of 1mm/s, the sample was elongated until rupture.
More suggestions(15)
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com