Sentence examples for speed of feed from inspiring English sources

Further, speed of feed particles are identified experimentally at various operating frequencies.

So, several experimental parameters as: carrier concentration, surfactant concentration, time and stirring speed of feed phase, initial concentration and pH of feed phase, were studied.

The effect of stirring speed of feed phase and stripping phase in case of phenol elimination using PIM was determined by varying the stirring speed from 200 to 800 rpm (Fig. 3).

The speed of wire feed motion affected not only burn phase duration but also short-circuiting duration.

Under a concentrically mounted state, R = 0.5D, and thus P = (N + n S, assuming a rotational speed of the feed cylinder of N = 15 r/min.

(2) When the minimum value of D is chosen Under a concentrically mounted state, R = 0.5D, and thus P = (N + n S, assuming a rotational speed of the feed cylinder of N = 15 r/min.

A statistical experimental design was prepared with the major influencing parameters of the MaxxMill®, such as rotational speed of stirrer, feed rate and bead size.

(3) When the speed ratio is constant, a lower rotational speed and a linear velocity of the work piece should be applied owing to the low speed of the feed movement generated through extrusion.

With the increased speed of wire feed motion, the whole energy input first increased and then decreased; the weld width and contact angle decreased, which was different from the effects of other characteristic parameters.

With the change in the wind profile, the speed of doubly fed induction generator (DFIG) of wind energy conversion system (WECS) changes from super synchronous to sub synchronous range and vice versa.

Figures 10d and 11d illustrate the experimental waveforms of the output voltage and line current under unequal DC voltage (Figs. 10a c, 11a c) due to variation of source and rotor speed of SIEG feeding resistive load and induction motor, respectively.