Sentence examples for speed lifted from inspiring English sources

Between 1500 feet and 1800 feet down the runway, the aircraft reached take-off speed, lifted off the ground, and began climbing normally as the crew retracted the landing gear.

The relatively higher wind speed lifts negatively charged dust particles upward which may recombine with positive ions and convert them into neutral particles.

Increase the speed, lifting and lowering your calves every 2 seconds.

High-speed lifts link everything, but they can't always disperse the crowds drawn by Vail's renown.

Fig. 2 SEM morphologies of the AgNWs/PVC/AgNWs films prepared with different dipping speed and lifting speed by the dip-coating process: a dipping speed = 40 mm/min, lifting speed = 100 mm/min; b dipping speed = 50 mm/min, lifting speed = 100 mm/min; c dipping speed = 60 mm/min, lifting speed = 100 mm/min; d dipping speed = 70 mm/min, lifting speed = 100 mm/min.

From Table 1, it can be found that the dipping speed and lifting speed are the important factors to influence the photoelectric properties of the AgNWs/PVC/AgNWs.

Figure 2 presents the SEM images of AgNWs films (Side 1) fabricated by the dip-coating process with different dipping speed and lifting speed.

From Fig. 2, it can be seen that the dipping speed and lifting speed also has great influence on the structure of the films.

In contrast, when the dipping speed and lifting speed is higher than 50 mm/min and 100 mm/min, respectively, most of the films have a sheet resistance over 200 Ω/sq with transmittance more than 85%%.

As shown in Fig. 1, the designed structure of AgNWs/PVC/AgNWs transparent conductive film includes two AgNWs films with the same structural property on both sides of PVC substrate, marked as Side 1 and Side 2. Actually, this structure was affected by many factors of dip-coating parameters, especially the dipping speed and lifting speed.

The experience of the speed, lift and landing was not like anything I had ever known flying on heavy airline equipment".