The microscope system illuminates the specimen with uniform brightness and transfers the observation image to image processing software, DotSlide.
Dalla et al. [30] showed that the shapes of the tensile stress-strain curve and tensile elongation depend on specimen size, with uniform deformation along the gauge section observed in small specimens, but not in larger specimens.
In this work, the parameters of a phenomenological model are extracted from tests performed on specimens with non-uniform geometry, which induce heterogeneous strain fields carried out on specimens with the same thermomechanical loading history.
The SnCl2 addition produced more uniform specimens, with only rare anatase-rich grains with a diameter <10 μm at higher Sn contents.
Impressions of the scales are known for several specimens; a specimen now assigned to L. lambei had a thin skin with uniform, polygonal scutes distributed in no particular order on the neck, torso, and tail.
The pore sizes and shapes are uniform throughout the specimens with porosities ranging from 36%to63%36%to63%
Once 3D reconstruction was completed for each specimen for both undeformed and deformed states, the models were discretized into elements with uniform thickness of 6 microns and 8.1 microns, respectively.
Or in other words, the specimens are not single crystal layers, but rather a large ensemble of small MoS2 grains with uniform thickness and excellent lateral coherence.
Fatigue tests of standardised uniform-gauge test specimens with duplex coating (plasma nitrided and hard PVD coating) were carried out in a low cycle regime at stress ratio R ≈ 0.05 at elevated temperatures of 150 °C and 500 °C.
Cylinder filled with uniform activity .
