Sentence examples for specimens with high from inspiring English sources

Tests of four specimens with high shear ratio are presented and investigated.

Measurements were executed in mortar specimens with high and low resistivities.

The specimens with high FA/clay ratio require low E/W.

The glass replaces sand in ratios of 0%, 10 %, 20 and 30%and30%der to produce CLSM specinens with high silicorderntonts.

The recently introduced TC-PCT modality proved capable of providing 3-D images of specimens with high axial resolution, deep subsurface depth profiling capability, and high signal-to-noise ratio (SNR).

The results showed a good correlation for specimens with high fiber orientation, whereas for specimens with low fiber orientation results deviate due to the high deviatoric matrix volume strain contribution.

The mechanical stress has significant influence on gas permeability for specimens with higher compressibilities.

These increased at greater rates for specimens with higher porosity levels (ie the Yb-stabilised coatings).

Specimens with higher concrete strength obtain higher load-bearing capacity but lower deformation capacity and strength index.

Analysis of the Weibull statistics showed that specimens with higher porosity exhibit a narrower scatter in fracture strength.

The larger specimens with higher weight require higher heat temperature and longer duration for the geopolymerization development.