Sentence examples for specimens with average from inspiring English sources

Different cross-linked porous PTMC specimens with average pore sizes ranging between 55 and 116 μm, and porosities ranging from 59%to83%3% were prepared.

In this study, we use MEMS-based testing techniques to explore the effect of strain gradient in 100, 150, 200 and 485 nm thick freestanding Aluminum specimens with average grain size of 50, 65, 80 and 212 nm respectively.

Eleven positive specimens with an average Ct value of 25.2 (± 4.8) cycles on the original PCR run, remained positive with an average Ct value of 25.9 (± 5.1).

This database considers only concrete specimens with an average 28-day compressive strength between 30 MPa and 80 MPa, and restricts the relative humidity of the experimental environment to a maximum value of 95%.

Five concrete batches were used to cast the column specimens with an average 28-day compressive strength (f c´) of 41 MPa.

They tested six specimens with an average height of 3.3 m and square cross section of 300 mm, and found that a significant relationship existed between the specimen dimensions and the behavior thereof under temperature.

Since the concrete specimens which had undergone accelerated corrosion experienced similar percentage steel loss of approximately 8 %, it can be concluded that the constant current specimen (with 9.5 % strength reduction) experienced greater strength reduction per percentage steel loss than constant voltage specimens (with an average of 5.1%% strength reduction).

Most species (133 out of 157) were represented by multiple specimens, with an average of 12 specimens per species; six species were represented by more than 50 specimens.

In contrast, a more than 10-fold increased PHD3 mRNA expression level was found in pancreatic cancer specimens with an average replicate number of 1183±219 mRNA copies per μl.

Mechanical properties of the Al Cu Fe quasicrystalline coating and a bulk Al Cu Fe quasicrystalline specimen with an average grain size of about 50 μm were examined using a set of micro- and nanoindentation techniques (with plotting stress strain curves).

We generated up to 49 cDNAs for each tissue specimen, with an average of 30 (SD 13.7) cDNAs per specimen.