Your English writing platform
Discover LudwigSuggestions(3)
Exact(15)
The interlaminar shear strength was effectively obtained, except for the notched specimens, when the span length was appropriately determined.
Further, it was observed that, it was not possible to prepare clay-coarse sand specimens when the sand content was above 60%, except in the case of bentonite-coarse sand series.
However, these irregularities will probably increase microbial adhesion in an in vivo testing with supragingival exposition of specimens, when the influence of intraoral shear forces becomes apparent [25, 28, 29].
These measurements are performed after high-temperature exposure, and the water in both liquid and vapor phases are allowed to escape the specimens when the pore pressure exceeds 100 kPa during the heating process.
Compared with the intact rock specimens, the different degrees of stress drop phenomena were produced in the process of cracked rock specimens when the stress exceeds the dilatancy onset.
Using a generalized maximum tangential stress criterion, possible effects from ignoring the contributions of KI and T are investigated for test results obtained from these specimens when the failure is due to brittle fracture.
Similar(45)
No enamel damage was evident in any specimen when the brackets were removed with the appropriate pliers.
Therefore, it can be concluded that the air voids and asphalt contents were more uniformly distributed throughout the specimen when the gyratory specimens were compacted on both ends.
Figure 6 (a and b) shows atomic potential energy views of the specimen when the diamond indenter penetrates into the specimen with a depth of 1.5 nm.
(3) The worn length of the steel spherical pin specimen on the steel flat specimen becomes close to the initial radius of the curvature of the pin specimen when the sliding distance is large.
The results reveal that steel fibers and air bubbles are uniformly distributed in UHPC specimen when the fresh mixture is prepared by adding a lower dosage of superplasticizer.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com