Your English writing platform
Discover LudwigSuggestions(5)
Exact(7)
The porosities of the specimens were less than 1%.
The drying shrinkage of all specimens were less than 0.06% at the age of 14 days.
The flexural tests results revealed that the load bearing capacity and deflection of HECCs specimens were less vulnerable up to 100 °C compared to ECC specimens.
The corrosion resistances of the S-phase layers on most of the specimens were less than that of the untreated stainless steels, but the AISI316 and JIS-SUS304J3 steels carburized at 400 °C showed the same excellent corrosion resistances as the untreated steels respectively.
In this study, when the extractions were done using the heating methods such as H1 and H2, both A260/A280 nm ratios and A260/230 nm ratios for all ten specimens were less than 1.8 that was indicative of ominously low purity/quality DNA due to the absence of specific DNA purification steps following cell lysis.
Group XS specimens were less sensitive at all frequencies (Fig. 4, Table 1).
Similar(53)
(The glaze on early specimens is less transparent and is denser).
It was also shown that the time and rate of drainage in the Gelfill specimens are less than those in CHF specimens made without sodium silicate.
Also, M/My ratios for the onset of ratchetting in stainless steel specimens are less than carbon steel specimens with same Dm/t ratios.
For the stiffness tests, variability between the specimens was less than 10% for all cases, and setup variability was less than 6%.
(The glaze on early specimens is less transparent and is denser). The body is gray to grayish white, best seen at the rim, where the glaze tends to be thin.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com