Sentence examples for specimens were installed from inspiring English sources

Test specimens were installed at different test sites and oriented either vertically or horizontally.

As shown in Fig. 3, specimens were installed to keep both ends in simple support condition and gradually increasing load was applied to the central part.

As shown in Fig. 1, alloy 690 tube was fixed in a "V" groove fixture, the load sensor was connected to the vibrator, and the plate specimens were installed under the load sensor by the upper fixture.

The specimens are installed as cantilever beam-columns, loaded with cyclic transverse shear force at the free end, while the axial compression is kept unchanged during the test.

Secondly, the stator and rotor specimens are installed in the holders, and the spring compression is measured.

However, we are unable to confirm this hypothesis as all the results in this study assume that all specimens are installed without any eccentricity.

ZrO2 melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed.

After the specimen was installed in the apparatus, cyclic loading tests were carried out under  MPa.

To induce critical crack at the center of the specimen, notches were installed at both sides of the specimen.

Linear variable differential transducers (LVDTs) were installed beneath the specimens at the loading points to measure the vertical deflection (Fig. 2).

Three strain gauges (SG) were installed on each specimen (Fig. 6); i. SG1 was installed on the spliced bar at about one bar diameter from the surface of the grout.