Sentence examples for specimens were illustrated from inspiring English sources

Representative specimens were illustrated in Table 1.

Detailed characteristics of the scaled specimens are illustrated in Fig. 2.

The geometric and material specifications of the specimens are illustrated in Table 3.

The geometric features of the DCB specimens are illustrated in Fig. 1.

To compare the hysteresis loops of SRCFT columns, the envelope curves of hysteresis loops regarding the four specimens are illustrated in Fig. 18.

The method of using fractal dimension of corroded surface to predict residual lives of pre-corroded specimens is illustrated in this paper.

This synergetic view on the cause of the fatigue crack origin displacement from the materials surface in area of high cycle fatigue (HCF) to the inside of specimens is illustrated by fatigue tests results for hardened materials of Ti- and Al-based alloys in areas of low cycle fatigue (LCF) and HCF.

Bioanalyzer quality measures and scattergrams of the probe signal intensities for cryopreserved specimens are illustrated in Figures 2. Intact samples have clear 18S and 28S ribosomal RNA peaks with low amounts of noise between them and no other peaks in the area before the 18S peak (Fig. 2A).

The detail structure of each specimen is illustrated in Fig. 1.

The LA-ICP-MS results, presenting the electrochemical-migration-induced longitudinal change in the Ca/Si ratio of the leached paste specimen are illustrated in Fig. 4.

The position and shape of the Cu gray matter subregions that are strongly immunoreactive to SP, as detected in 37 consecutive sections encompassing about 4.5 mm caudo-rostral extent of a full-term newborn specimen, is illustrated in three-dimensional rendering in Fig.  1A D.