Sentence examples for specimens to study the effects of from inspiring English sources
An experiment was conducted on four lightly reinforced concrete (RC) wall specimens to study the effects of axial force, amount of shear reinforcement, and shear span to wall length ratio on their seismic behaviors such as load and displacement capacities, damage progress, and failure modes.
Hence, in this study, five RC frame specimens were tested to study the effects of rotational capacity and degree of horizontal restraint on CA. One frame served as a control specimen, two specimens for improvement in rotational capacity, and another two with inadequate horizontal restraint.
Mortar and paste specimens containing nPOFA were prepared to study the effects of nPOFA on compressive strength and the microstructure.
These specimens were tested for tearing resistance, to study the effects of these structural parameters on the tearing resistance of the fabrics.
Three different types of specimens were fabricated and subjected to compression loading to study the effects of the location, the number of delaminations, and the thickness of the Teflon film on buckling and post-buckling behaviors of the specimens.
The specimens with eccentric and edge columns are those having geometrical eccentricity and whose results are compared with those obtained for specimens with central column to study the effect of column eccentricity.
Furthermore, it was concluded that the conventional tensile specimens are more appropriate to study the effect of thickness changes on the elongation of TRBs.
For temperature specimens, the first letter however starts from 2 as a number of specimens were fabricated in order to study the effect of constant temperature and named as GT1 series but discarded later from the experimental study.
It should be noted that specimen (TL) contains side notches to study the effect of geometry.
Compressive experiments on the perforated honeycombs with different cell numbers are conducted to study the effect of specimen sizes.
In order to study the effect of OBD treatment, specimens were thermally oxidized at 450 °C in air for 2 h.
