Your English writing platform
Discover LudwigSuggestions(2)
Exact(1)
In alloys containing 50 at.% or less Ti, where it was possible to synthesize nearly single phase specimens, the calculated heats of formation agree within a few kJ/mol of the calorimetry data, while the calculated isotropic elastic constants agree within 5% of the experimental values.
Similar(59)
A highly sophisticated equipment which can measure the temperature rise curves both on the surface and at the heart of the rubber specimen was used to verify the calculated results.
The concentration of auraptene in the specimens was calculated from the standard curve.
The measured lateral resistances of slender specimens are approximately 130% of the calculated flexural strength.
The sorptivity of the specimens were calculated by using the formula suggested by Stanish et al. (1997).
To determine the stress intensity factor, KIc, critical crack tip opening displacement CTODc, the Two Parameter Method was used and the fracture energy, Gf of the specimens was calculated to evaluate the fracture properties of FRPC.
Therefore, the amount of moisture of the preheated specimens is calculated considering the water content of the concrete mixture and weight loss due to preheating.
A uniaxial load cell (Sensotec Model 129, 25 lb capacity, Honeywell International, Inc., Columbus, OH) was used to monitor cable tension, and the moment applied to the specimen was calculated as the product of the cable tension and the diameter of the loading ring (N*mm).
The densities of the specimens were calculated from their mass-to-volume ratio, where the specimen dimensions were measured by a caliper.
The shear capacities of the tested specimens were calculated using the strut and tie models (STM) and non-linear finite element analysis (NLFEA).
To get an idea of the number of contributors typically represented in biobanks relative to the number of specimens, we calculated the ratio of specimens to contributors for each biobank.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com