Sentence examples for specimens of length from inspiring English sources

Dog-bone CLC specimens of length 600 mm and 150 mm × 100 mm cross section (test region) were cast with different synthetic fiber dosages and tested under uni-axial tension.

The contacts between the two steel diametral loading platens and the curved surfaces of a cylindrical specimen of length H and diameter D are modeled as circular-to-circular Hertz contact and straight-to-circular Hertz contact for ISRM and ASTM standards respectively.

After acclimatization, the specimens of similar length and weight were transported to selected polluted site, randomly placed in nylon cages, and transplanted in the polluted river water.

Our model describes the whole course of engineering stress strain diagrams up to rupture and the differences in the diagrams for test specimens of different length.

The kink behavior of non-slender glass fiber-reinforced epoxy prismatic specimens of variable length and fiber volume fraction at temperatures ranging from 25 °C to 125 °C was investigated.

As a consequence, this material exhibits different characteristics when specimens of different length-scale are deformed.

This true strain and stress relation is obtained from a series of tensile experiments with specimens of different length-per-breadth ratios.

Four groups of specimens of different lengths, cut from the same log, were tested under the same conditions under longitudinal tensile loading.

The static tensile tests showed that there is an important size effect: the strength of the specimens decreases when increasing the size of the specimen, for lengths of 5 cm or less.

We consider a GaN specimen of equal length L and width W, L = W = 2 μm.

The specimens of 70 mm length and 40 mm width were cut using laser cutting machine.