Sentence examples for specimens is determined from inspiring English sources

The dynamic stress intensity factor history for the specimens is determined using the finite element method based on the measured dynamic loads.

After the preliminary determination of the reference unnotched fatigue response, the notch fatigue behavior of as-built DMLS Ti6Al4V specimens is determined.

Following the recently published ICC-ES AC434 guidelines, mechanical performance of prismatic composite specimens is determined on the basis of tensile uni-axial tests.

Based on the transverse distribution characteristics of tensile strain at the bottom of SCB specimens, a 5 cm cracking zone in the center of specimens is determined and the average tensile strain is captured by DIC systems.

The maximum bonding shear stress of pure adhesive bonding specimens is determined as 1.64 MPa in the short-term loading test, which reduces 10%and20%0% in the long-term loading test.

The degree of AMS (P = K MAX/K MIN) of the 172 oriented specimens is determined by the foliation (F = K INT/K MIN), which is relatively low and constant and ranges from 1.002 to 1.013 with an average value of 1.005 (Fig. 5b).

When this technique was combined with paleomagnetic dating (the calculation of a rock's age by comparing the magnetic orientation of the iron within it to that in surrounding rocks), the specimens were determined to be approximately 1,977,000 years old.

The oven-dried masses of the specimens were determined.

Hemolysis produced by standardized specimens was determined spectrophotometrically (n = 6/material).

The hydraulic conductivity of these GCL specimens was determined.

Afterwards, the compressive strengths of the specimens were determined.