Sentence examples for specimens increased by from inspiring English sources
The water permeability of the mortar specimens increased by about one to two orders of magnitude due to leaching degradation.
The load-bearing capacity of the strengthened specimens increased by as much as 100% relative to that of unstrengthened reference specimens.
The tensile force capacity of the strengthened BFRP UHTCC specimens increased by 42% to 172% compared to the reference specimens depending on the reinforcement ratio of the BFRP grid.
As a consequence, strength loss of the specimens increased by the addition of FNS aggregate, as shown in Fig. 8.
On the other hand, toughness of the control heat-damaged CH2 and CH3 specimens increased by 29 and 42%, respectively as a result of exposure to 500 °C for 2 and 3 h.
The height decrease rate of the PU specimen increased by a factor of 6 with increasing normal force and temperature while the general degradation characteristics were maintained.
Compared with the standard cured specimen, the carbonation depth of the accelerated cured specimen increased by 61% for the control C25 concrete and by 56% for the control C35 concrete.
As a result, the peak stress and toughness of the Kevlar-woven fabric specimen increased by as much as two times, with increasing strain rate in a range of 1182 1460 s−1, whereas the strain at peak stress decreased by approximately 16%.
The L10 life of the treated specimens increase by 99.6% and L50 life enhance by 236.3% at a Hertzian stress level of 5.1 GPa and 90% confidence level, respectively.
Average ISQ of all specimens increased in a time-dependent manner (results indicated by a line).
From Fig. 6b, it can be seen that the wear of magnesium alloy specimens increased with the increase in sliding speed when lubricated by all the fluids.
