Sentence examples for specimens improves the from inspiring English sources

A new support for biological specimens improves the resolution that can be achieved by electron microscopy.

Rounding the corners of the square specimens improves the situation for square specimens and performance enhances with increasing corner radius.

It was observed that the process applied to untreated specimens improves the fatigue life of the specimens that were plasma nitrided for 0.5 h due to the subsurface crack nucleation.

The GenoType® MTBDR plus assay performed directly on sputum specimens improves the management of chronic TB cases allowing more appropriate anti-TB regimens.

When combining the solid lubricant with dimples, the textured specimens improved the tribological performance for most applied loads.

Furthermore, exposure to UV radiation results in the shrinkage of the specimens improving the interfacing bonding whereas exposure to moisture results in the swelling of the specimens weakening the interfacial bonding.

As compared with the rice husk particleboards, incorporation of 10 40% of the strands in the face layer of the specimens improved the flexural modulus and strength by 21 166% and 35 202%, respectively.

The results achieved from this investigation indicate that in the displacement-controlled condition, with the increase of fiber fraction, the cyclic behavior of the specimens improves and in the after-yielding region of loading, this increment results in more obvious discrepancy among loading conditions.

It is found, however, that the performance of these specimens improves dramatically when the square inner steel tube is filled with concrete.

It is demonstrated that the fatigue strength of the ball-burnished specimens, when compared with the non-treated specimens, improves for 3 × 104 to 106 cycles, and that the bending fatigue limit is increased by 21.25%.

The ageing tests, also suggested that the wettability of specimens improved with the addition of GO, which might be attributed to microvoid formation on specimen's surface during the elapsed time at the elevated temperature.