The only possible exception may be in Agujaceratops mariscalensis, in which two presumed juvenile or subadult specimens have six episquamosals [38] and a single known presumed adult has ten [39].
All specimens had two circular openings, one in each shear span, that were placed symmetrically about the mid-point of the beam (Fig. 1).
Test specimens had four layers, which had various orientation angles.
The constructed specimens had four different compressive strengths, and were heated and tested at six different temperatures (23, 100, 200, 400, 600, and 800 °C).
The bending specimens had three drilled holes that were either pristine or exposed to outside weather conditions at various locations for 3 12 months.
An experimental program was carried out to characterize the mechanical behavior and electrical capacitance change of CFSCs, where unidirectional tension and double cantilever beam tests were performed on specimens having three dielectrics and four layup configurations.
The high cycle fatigue (HCF) behavior of Ti 6Al 4V is investigated for cylindrical specimens having three sizes of geometrically similar circumferential V-notches, each with an elastic stress concentration factor, Kt, of approximately 2.78.
The third specimen had two light-weight concrete panels on both sides of the steel plate.
The specimen has two separated notches, A and B, with different size of the loaded volume associated with them, respectively.
The specimen had two adherends made of a glass fiber reinforced thermoplastic (TEPEX�� Dynalite 102-RG600 6)/47%-3.0 /47%-3.0-Lammnates GmbH, Germany) including polyamide 6 (PA6) matrix resin.
