Sentence examples for specimens experiences from inspiring English sources

All specimens experiences abrupt breakout failures when the cracks are reached the edge of the specimens.

The smooth specimens experienced a uniaxial stress state, while the notched specimens experienced a triaxial stress state in the vicinity of the notch.

Specimens experiencing more FTCs tend to have larger ductility coefficients and plastic rotation magnitudes.

At high temperatures, i.e., above 600 °C, the specimens experienced the two aforementioned oxidation mechanisms.

The FRCM specimens experienced cracking prior to failure whereas the FRE specimens failed suddenly by fabric rupture without cracking.

Moreover, impacted specimens experience a temperature and stress concentration at the impact area dependent on the indentation.

All specimens experienced failure associated with weld shear or shear failure in the heat affected zone near the weld.

In addition, the FGC specimens experienced a graceful failure behaviour, absorbing high amounts of energy during extended compression paths.

Both longitudinal and transverse stress components were present in the central region of the plate specimens, while rotating bending specimens experienced nearly uniaxial cyclic stress.

The stress-strain curves, the creep strain the specimens experience due to the sustained axial load during fire, and the residual strength of the test specimens are discussed.

In contrast to butt welded connection specimens, the transverse and longitudinal fillet welded connection specimens experience failure in the base metal throughout 20 800 °C exposure range.