Sentence examples for specimens applied from inspiring English sources

Then, the simulation results from the PSC and RC specimens applied with impact induced fire or blast induced fire loadings were compared with those of undamaged PSC and RC specimens.

In contrast with the isothermally aged specimens, applying plastic deformation to the solutionized samples accelerated the completion and saturation of fcc metastable) → hcp transformation after 8 h aging at 850 °C.

The influence of elevated operating temperature on the fatigue strength of autofrettaged and non-autofrettaged components was simulated for intersecting hole specimens applying fracture mechanics based approaches of various complexity.

Fig. 3 Adherents placing in the jig: alignment of the adherends (a) and placement of the spacers (b) Fig. 4 Manufacturing of the TAST specimens: applying the adhesive (a) and adherends' positioning in the jig (b) Fig. 5 TAST specimen attached to the testing machine with the mechanical extensometer.

Digitization provides motivation for attending to important curatorial requirements, such as organizing specimens, applying annotation labels to synchronize the name on the folder with the name on the specimen, and examining specimens for required conservation attention.

In addition, compression strength test was performed for specimen applied with impact to measure residual strength of structure after impact to analyze structural behavior.

Calcium hydroxide density change inside of each concrete specimen applied with repair specification tends to be higher than new specification except type 5 wherein carbonation did not occur.

Open image in new window Fig. 4 a Rubber specimen without speckled pattern and b specimen applied with speckled pattern and additional pieces of rubber at the grip contact area.

For each specimen, applied engineering stress was calculated by using cross-sectional areas measured before loading.

For the investigations, fine polished tubular specimens were applied which were analysed for microcracks on the specimen's surface after a defined number of cycles.

Axial loads and bending moments about the longitudinal axis of the specimens were applied.