Sentence examples for specimens and consequently from inspiring English sources

Orientation effects due to texture are shown to be a result of stress relaxation in strain control specimens, and consequently occur in some cases of notched specimens.

Furthermore, the combined surface thermochemical treatments improves the tribological behaviour of the material, and in particular, sulphuration significantly changes the morphology of the treated specimens, and consequently, the dry sliding wear of the sintered material is decreased.

We reported about a "probable OBI reactivation" because in in this large retrospective study we did not collect liver specimens, and consequently we cannot confirm the presence in the liver extracts of almost two out of three HBVgenes (core, X, surface) in patients who reactivated infection, which has been defined as the diagnostic criterion of OBI [ 1].

Then, the shear strains (( gamma_{xy} )) are, in fact, dependent on the measuring ranges of the test specimen, and consequently the angles of the principal strains (( theta )) calculated from Eq. (3) differ.

None of the 2 ELISAs had 100% sensitivity; Enzygnost missed 1 positive specimen and consequently showed a sensitivity of 99.5% (186/187) while Murex showed a sensitivity of 98.9% (185/187) because it failed to detect 2 positive HIV-1 group M specimens (Table 2).

The measured strain data are used to quantify the bridging tractions associated with each specimen thickness and consequently the energy release rate (ERR) due to the bridging.

The findings showed that from 25 to 600 °C, irrespective of the type of test (in vivo or post-firing), compressive mechanical strength rose, with the specimens exhibiting elastic behaviour and consequently brittle failure.

In 38 cases (39%), surgical resection of metastases (and consequently specimens collection) was performed after the administration of chemotherapy.

The cylinder specimens were rid of impurity and consequently used for the experiments.

This is because the NP1F0 specimen had only one diagonal crack, and consequently all local deformations concentrated on this critical crack, while multiple diagonal or flexural cracks occurred in the other specimens with steel fibers.

Considering different biaxial loading conditions it is possible to cover a wide range of stress triaxialities and Lode parameters in tension, shear and compression domains and consequently the newly proposed specimens facilitate a controlled study of damage and fracture at different stress states.