Exact(2)
In patients with positive margins on initial lumpectomy specimens, an average of two margins was involved, with no difference between the two arms.
For resected specimens, an average of 3 × 1.6 mm cores were assessed on tissue microarrays; however, due to limitations in tissue availability, only one or two cores were assessed for biopsy specimens.
Similar(58)
After measuring the area where bones were formed by randomly designating 4 locations from one specimen, an average was calculated and shown by ratio.
Most species (133 out of 157) were represented by multiple specimens, with an average of 12 specimens per species; six species were represented by more than 50 specimens.
We sequenced all of the 24 specimens to an average coverage of 1079× and a minimum coverage of 600× per exon and specimen.
In steady state tests, TRM specimens maintained an average of 85% of their ambient bond strength up to 400 °C, whereas the corresponding value for FRP specimens was only 17% at 150 °C.
Since the concrete specimens which had undergone accelerated corrosion experienced similar percentage steel loss of approximately 8 %, it can be concluded that the constant current specimen (with 9.5 % strength reduction) experienced greater strength reduction per percentage steel loss than constant voltage specimens (with an average of 5.1%% strength reduction).
The biomechanical properties observed for the TA, TP, and PL were noted in specimens despite an average age of 78.3 years.
In every case, tumor cellularity was calculated using the proposed formulas by Atuegwu et al. In every case, also tumor cell count was estimated on histopathological specimens as an average cell count per 2 to 5 high-power fields.
The fibula of the intact specimens displaced an average of 8.6 ± 1.7, 2.4 ± 1.0, and 1.4 ± 1.0 mm in the anterior, lateral, and superior direction, respectively, when the foot was externally rotated 35°.
Pre-fatigued specimens had an average grain size of 45 nm, a sharp {0 0 1} texture and a high fraction of low-angle boundaries and of twin, or Σ3 coincidence site lattice (CSL) boundaries.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com