In this study, six series of concrete cube specimens with size range 1 4 were tested under concentrated load.
In this research, carbonation resistance measurements and compressive and flexural strength tests were performed on the mortar specimens with size of 40 × 40 × 160 mm.
Thereafter, prism specimens with size of 30 mm × 30 mm × 120 mm are sawed from the 3D printed structure.
Tissue specimens with sizes between 5 and 12 mm were treated for single and double immunohistochemical stainings with a standard technique as reported previously [ 22].
In this work, firstly, high-pressure air blasting experiment is conducted on concrete specimen with a size of 600 mm × 600 mm × 600 mm, the blasting crack distribution is observed and the particle vibration acceleration at the outer boundary of the sample is monitored.
In brief, fungal colonies were cultured for 28 days and a rectangular specimen with agar (size of 1 × 0.8 cm) was collected from the edge of the cultured fungal colony using a sterile scalpel.
In brief, fungal colonies were cultured for 28 days and a square specimen with agar (size of 1 × 1 cm) was collected from the edge of the cultured fugal colony using a sterile scalpel.
Optical projection tomography (OPT), a relatively recently developed technology for 3D imaging, has emerged as a powerful tool for 3D reconstruction and visualization of specimen areas with sizes between 1 10 mm across [2], [3], [4], [5].
The flow stress at 0.2% plastic deformation scales with specimen size with an exponent between −0.6 and −0.9, depending on the initial structure and size regime.
Forty-eight prism specimens with the size of 100 mm × 100 mm × 300 mm and ninety-six cubic specimens with the size of 100 mm × 100 mm × 100 mm were fabricated and tested.
