Residual strain of the specimen decreases with an increase in sand fraction, and its value of cemented specimen is much lower than that of uncemented specimen.
It was found that a coated AZ91D specimen was much more corrosion resistant and harder than an uncoated one.
At the same binder content, the strength of the Al2O3 sand SLS specimen is much higher than that of commonly used quartz sand.
The quick coking test shows that catalytic coking does not take place on the coating, and the carbon deposited on the surface of the coated specimen is much less than that on the surface of the pre-oxidized specimen.
The crack opening and slip displacements at the maximum load were larger than those of the NP1F0 specimen having no steel fiber because the maximum load of the HP0F1 specimen was much higher than that of the NP1F0 specimen.
Hence, it is likely that the hydrogen concentration within 50 μm from the surface of the cathodically hydrogen-charged specimen was much larger than that of the specimen immersed in 0.2 % APF solution.
While the mastodon, bison and mammoth remains are thought to be at least 12,800 years old, scientists believe the ski bum specimen is much more recent, according to lead researcher Dr. Cassius Abuzz, curator of paleontology at the American Skiing Hall of Fame.
The larger is the nasal horn, typically only 15-25 cm, though the longest recorded specimen was much longer at 81 cm.
However, if there are multiple large deposits of melanoma cells that extend deeply into the central part of an SLN, the prognosis is much worse, and the chance of finding additional metastases in non-SLNs in a completion lymph node dissection specimen is much higher.
In the present study we found that (a) for compression-moulded specimens the shear viscosities obtained using a cone-and-plate rheometer did not overlap those obtained using a capillary rheometer, while for solvent-cast specimens there was a reasonably good agreement between the two, and (b) the viscosities of solvent-cast specimens were much lower than those of compression-moulded specimens.
