Suggestions(1)
Exact(60)
The specimen was placed inside the Hoek cell and sealed by top and base pedestals.
The specimen was placed in the grips of the machine and pulled until there was failure.
The specimen was placed on a 10 mm rubber mat in a steel mould.
The aged G/Z specimen was placed in one cheek pouch for each animal as the tested material, while the unaged G/Z specimen was placed in the contralateral side as the control.
Each specimen was placed into a plastic vial with 5 mL of 2% methylene blue for 48 hours.
Each specimen was placed in the device with the top of its cavity against the acrylic surface.
The specimen was placed under a monotonic vertical load to simulate the progressive collapse of the frame.
For the measurement, the specimen was placed into a planar plastic container and the formalin level was reduced.
The specimen was placed on the standard transmission electron microscope (TEM) grid and observed using an H-9000NAR TEM.
First, the test specimen was placed in the fixture shown in Fig. 1 with two opposite edges fully clamped and the remaining two edges completely free.
In this case, the central 200 mm cracked length of each specimen was placed in contact with chloride solution, and other surfaces were sealed.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com