Sentence examples similar to specimen using non from inspiring English sources

In this section, the loads corresponding to crack initiation in the ECT specimen are used to calculate the critical strain energy release rates through the width of specimen using non-linear elastic finite element models.

The specimen surface was inspected using non-contact profilometery every minute for the first 10 minutes of testing, with a subsequently increasing inspection interval for a total of 150 minutes.

A new POCT with rapid turn-around time, using non-invasive specimen types such as urine, vaginal swab, or saliva specimens, would minimize most of the barriers in this area.

All the while Cosans clearly demonstrates how Owen dealt with the issue of race by using non-European specimens such as the crania of Papuans to typify man, providing strong support "that the difference between Papuan and adult ape skulls overshadows any difference between Papuans and Europeans" (pg. 52).

Relatively low sensitivity of the CTM-MTB for smear-negative samples is a known shortcoming and has been recently confirmed by direct comparison to Xpert MTB/RIF using non-respiratory specimens (78% vs. 98%) [ 13].

We then use the model to evaluate the effect of the previously mentioned variables as well as aggregate intrinsic permeability on the macroscopic permeability of the same composite specimen using a series of non-conforming FE meshes and level set functions to monitor the heterogenities.

This study examined the engineering and true axial stress strain behavior of smooth cylindrical and shallow and deep notched cylindrical test specimens, under applied axial tensile loading using non-contacting methods, of both conventional and highly crosslinked ultra-high molecular weight polyethylenes (UHMWPEs).

A sensitive assay to identify biomarkers using non-invasively collected clinical specimens is ideal for breast cancer detection.

In this research work, the blasting induced effects by Al2O3 and ZrO2 particles and their evolution after annealing at 700 °C were evaluated in 316LVM (Low Vacuum Melting) stainless steel specimens using two non-destructive thermoelectric techniques (NDTT), the non-contacting and contacting thermoelectric power measurements.

In contrast, a non-retrofit specimen and a specimen using partial de-bonding for a central part had flexural cracks distributed wholly, and accordingly, there was no seriously concentrated falling off area.

Each specimen was washed in MILLI-Q water before total genomic DNA was extracted non-destructively from the whole specimen using Easypure genomic DNA Extraction kits (TransGen, Beijing, China).