Sentence examples for specimen to low from inspiring English sources

The mechanical response of each specimen to low velocity impact load is compartmentalized through two test cases: (i) specimen impacted on the ductile metal layer and (ii) specimen impacted on the brittle composite layer.

Exposing the pullout specimens to low temperature resulted in a decrease of 10% in their bond strength.

For safety and convenience, two identical single-stage pulse tube cryocoolers instead of liquid hydrogen are used to cool one side of the foam specimen to the lowest temperature of 26 K.

Detection of cracks in Al2024 T351 specimens subjected to low cycle fatigue loading by a certain non-destructive inspection technique is demonstrated.

An alternative approach to a corrosion-fatigue test scenario is suggested by micro-notching fatigue specimens prior to low salt flux corrosion to form grain boundary sulphide particles within channel-like features akin to stress assisted morphologies.

In this work, irreversible cyclic plastic energy in terms of entropy generation is utilized to experimentally determine the degradation of different specimens subjected to low cyclic bending, tension-compression, and torsional fatigue.

It is invasive, and prone to variation in the length and size of the tissue specimen which leads to low reproducibility and high intrapatient variation [ 4, 5].

In contrast, specimens subjected to low-temperature carburizing and ion implantation show no changes at the microstructure scale.

It is also revealed that after stress relief, the hardness does not decrease considerably in heavily rolled/annealed specimens here as compared to as-cast/annealed specimens, probably due to low shear band density.

Grade 45 structural steel specimens were subjected to low cycle stress or strain-controlled reversed tension compression and cyclic pure bending.

It was found that all silica filled composites had a reduced interfacial crack area when specimens were subjected to low energy impact.