Sentence examples for specimen the formation from inspiring English sources

However, on the surface of the specimen the formation of structural defects has been not observed even with a standard metallographic microscope.

In the fracture surface of the thicker tensile specimens the formation of a sheet-like structure was observed.

Since most changes of cement macro- and microstructure were seen to happen on the surface of the specimens, the formation of the porous peripheral layer likely consumed closed pores, resulting in a decrease in number of closed pores.

EBSD and XRD measurements respectively performed under loading and on the post mortem specimen highlighted the formation of about 4% of martensite.

The UV visible absorption spectra (Fig. 2) of the solution containing the inhibitor after the immersion of the iron specimen indicated the formation of a complex with the iron surface allowing the formation of adhesive film.

In addition, no hardening is observed at the surface layer of the specimen despite the formation of the hydride and hydrogen enrichment.

The UV visible absorption spectra of the solution containing the inhibitor after the immersion of mild steel specimen indicate the formation of a SB1-SB5 -Fee complex.

Scanning electron microscopy with energy dispersive X-ray analysis along the cross section of aluminized specimen revealed the formation of multilayer.

To ensure the integrity of each specimen and the formation of Au-S bond on GNR after MUA modification, we measured the characteristic extinction spectra, the XPS, and the zeta potential of as-synthesized GNR, GNR-MUA, and 1-undecanethiol modified gold nanorods (GNR-UDT) (Figure 1c).

It is shown that applying a temperature gradient along the FSMA foil specimen results in the formation and propagation of a martensite austenite phase boundary from the hot to the cold side, allowing for reproducible strain temperature characteristics.

It is demonstrated that the stress concentration areas of the BMG specimens facilitate the formation of shear bands, and the presence of "soft" and "hard" regions due to the stress gradient confines the propagation.