Sentence examples for specimen produced with from inspiring English sources

After soaking in SBF, it was observed that the specimen produced with PVA binder or less laser output power possessed a better apatite induction ability.

In the specimen produced with a lower arc current and lower dilution a protective layer of Si O is formed, while in the specimen produced with a higher current two layers could be identified: an external one of Fe2O3, with small features of Fe3O4 and NiFe2O4 spinel rich phases, and an internal one of Fe3O4 with small amount of a dark phase evenly distributed rich in silicon, nickel and iron.

Experiments are performed on specimens produced with and without entrained air voids.

A drop-weight type impact test was applied to the specimens produced with and without waste rubbers.

The performance of the method has been validated on UHPFRC specimens produced with varying matrix formulation, fibre length, fibre content and orientation.

For purpose of building the models, experimental results for 188 specimens produced with 41 different mixture proportions are obtained from the literature.

For purpose of constructing these models, experimental results for 210 specimens produced with 35 different mixture proportions were gathered from the literature.

To build these models, training and testing of the network by using experimental results from 144 specimens produced with 16 different mixture proportions were conducted.

For purpose of building these models, training and testing using experimental results for 144 specimens produced with 16 different mixture proportions were conducted.

For purpose of building these models, training and testing using the available experimental results for 195 specimens produced with 33 different mixture proportions were gathered from the technical literature.

This dataset contained unconfined compressive strength (UCS) results of 585 CPB specimens produced with a different combination of influencing variables, including the physical and chemical characteristics of tailings, the cement-tailings ratio, the solids content, and the curing time.