Your English writing platform
Discover LudwigSuggestions(2)
Exact(3)
This explained why the E2 specimen presented a larger network pore size than the E1 specimens.
The specimen presented a high photodetection sensitivity with an on/off ratio larger than 250 and a peak photoresponsivity of 12.8 mA/W at 900 nm.
The hydrophilicity analysis, which was obtained by measuring PBS contact angle, showed that the E1 and E2 specimens had a contact angle of <5°, whereas the M specimen presented a contact angle of approximately 59°.
Similar(57)
Full DM specimens (as large as 14 × 10 mm) were fully mapped at various planes and subsequently could be remounted and analyzed by XRD, μCT and SEM/SDD-EDS, while the only published results of FTIR imaging of a JDM specimen presented an FTIR image obtained from an area of 312 × 375 μm of a 2 to 4 μm thin section [ 8].
The specimen presents a good recycling ability.
Whereas the untreated specimen presents a RMS roughness RRMS around 16 nm, the PBII treatments were shown to increase it, from 44 nm, at 550 °C, to 82 nm at 770 °C.
The uncorroded RAC specimens presented a comparable bond strength to that of conventional concrete (CC).
Analogously, the narrower specimens presented a lower residual flexural strength than did the wider ones.
The two unreinforced diagonal tension specimens presented a brittle failure due to splitting along the compressed diagonal.
All specimens presented a fully dense and porous free external layer with a polyfaceted columnar microstructure highly adherent to the plasma-sprayed coating.
The age of the specimens presented a methodological challenge.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com