Sentence examples for specimen increase from inspiring English sources

The results show that both axial and radial strains of a coal specimen increase with continuous methane injection pressure.

Furthermore, the wear rates of the basic body of the uncoated reference specimen increase rapidly at tribological stress at high temperatures.

Both the maximum value of COD (CODmax) under loading and the residual COD (CODres) after unloading of UHPC specimen increase with the more addition of steel fibers when exposed to the same stress level of splitting load.

The experimental results of double cantilever beam (DCB) tests demonstrated that, with 2 g/m2 addition of GO, the Mode-I fracture toughness and resistance of the specimen increase by 170.8% and 108.0%, respectively, compared to those of the plain specimen.

Smaller sizes of colony and prior β grain in the β-annealed Ti64 specimen increase the resistance to HCF by reducing effective slip length, as in the mill-annealed counterpart (Lütjering 1998; Ziaja et al. 2001; Lucas and Konieczny 1971; Bowen and Stubbington 1973; Demulsant and Mendez 1995).

The surface roughness of the test specimen increases when these two parameters increase.

The failure modes transition from spalling through web failure as the percentage of macroporosity within the specimen increased.

In contrast, as the thickness of the specimen increased, different tendency was observed.

The mechanical strength of the healed specimen increases with decreasing volume fraction of ethanol.

The effective stiffness of the specimen increased with increasing vertical loads and decreased with increasing roof displacements.

The height decrease rate of the PU specimen increased by a factor of 6 with increasing normal force and temperature while the general degradation characteristics were maintained.