Your English writing platform
Discover LudwigSuggestions(1)
Exact(37)
The specimen height to width ratio was 1.5.
Variations in hardness result from the change in cooling rate along the specimen height.
The energy release rate increases as the crack length increases and the specimen height decreases.
Relative deformation is defined as the ratio between final deformation and original mixture specimen height [11].
At the end of this period, calipers were used to measure the change in specimen height.
The test variables included concrete compression strength, the spacing of the spiral reinforcement and specimen height.
Similar(23)
Inter individual differences between specimens' height were not considered in the present study.
The specimens had height of 40 cm, and average diameter of 20 cm, and wall thickness of 2 cm.
It is shown that the type of material response becomes less important for specimens with height-to-diameter aspect ratios greater than 7.5 and for loads applied to points in the kernel of the cross section, while for higher eccentricities the presence of a tensile strength increases considerably the limit load.
This device allows for proper positioning of the elbow during the late cocking phase of the throwing simulation and is easily manipulated to suit cadaveric specimens of heights between 1.60 m and 2.10 m.
The column specimen has a height of 7500 mm, a diameter of 1500 mm and reinforcement ratios of 1.23 1.46%.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com