Sentence examples for specimen group from inspiring English sources

An intact single vertebra specimen group (n=12) was also imaged and tested under axial loading.

The change of the DC conductivity of the specimen group prepared with different water content is shown in the Fig. 6a and the results of the specimen group prepared with different SP content are shown in Fig. 6b.

This indicates that the flow plays a decisive role in determining the MWNT distribution, because water content was constant in the specimen group with different SP/C ratio.

The first group of characters was used to identify the specimen group (A, B, or C) and the FRP anchor pattern used in the specimen (see Fig. 2).

If the mortar coefficient is not considered, the ratio of the test result to the calculation was 0.66 on average, but the average strength of the B2-C1 specimen group was extremely low.

The percolation phenomena manifested in the MWNT-embedded cement composites fabricated under the low flow condition indicated that MWNT was well distributed throughout the composites and the MWNT distribution was consistent in the specimen group.

Two specimen groups, six each, were subjected to elevated temperatures of 500 °C for 2 and 3 h, respectively.

To understand the MWNT distribution states, the image analysis and DC conductivity measurement for the specimen groups were carried out.

The control had a hardness of 321.9 ± 61.1 MPa, which was significantly greater than the hardness of all specimen groups.

No significant differences were detected in the proportional elasticity module or tensile strength of the specimen groups.

Thus, these 3 specimen groups classified by the combined model assigned progression risk in a meaningful manner.