Sentence examples for specimen fails at from inspiring English sources

A properly tested specimen fails at the droplet's tip fibre interface, revealing the ultimate interfacial shear strength.

Higher density test specimen failed at lower deformation due to increase in the stiffness with an increase in density.

(Fig. 8a), significant slippage took place and the specimen failed at approximately 33%% lower than its theoretical flexural strength.

After testing, the averaged crack angle θ avg is obtained by averaging the measured inclined angles of main diagonal cracks corresponding to the loading direction in which the specimen failed at loading moment.

For the bonding processes with PBHT, the bonding specimens fail at the bonding seam.

The eccentric specimens failed at load 35% lower than that of the concentric ones.

An exception was Tenure All-Surface Bonding System in which all specimens failed at the dentin/adhesive interface.

UD specimens failed at the weld interface while quasi-isotropic specimens showed delaminations both in the flange or skin laminates and at the weld interface.

6 of the 8 specimens failed at the tendon mid-substance; 2 specimens failed at the bone-tendon insertion.

In this consecutive revision case series, 9 retrieved specimens of a failed Birmingham Hip Resurfacing (BHR) were divided according to the time to fracture: 3 specimens failed at less than 6 months (Group 1), 3 failed between 6 months and 3 years (Group 2) and 3 failed later than 3 years (Group 3).

To do this nine failures were considered, which were split into groups depending on the failure time: 3 specimens failed at less than 6 months (Group 1), 3 failed between 6 months and 3 years (Group 2) and 3 failed at more than 3 years (Group 3) after HR surgery.