Sentence examples for specimen fabrication from inspiring English sources

The experimental procedures of specimen fabrication and material characterisation methods are presented.

For specimen fabrication, a Nomex honeycomb core and a carbon epoxy composite were used.

Specimen fabrication, gripping and load application methods, in addition to material properties of the various components comprising the resin tooth adhesive bond, will influence the stress distribution and consequently, the nominal bond strength and failure mode.

The dynamic modulus master curves are higher than those of the flexural stiffness for all the surfacing materials especially at low frequency and/or high temperature, which is probably due to the major differences in state of stress, specimen fabrication and aggregate interlock effect between the two test methods.

For this, we have optimized the needle-shaped specimen fabrication procedure by FIB for samples with multiple layers of QDs.

The plates were inserted into a silicon dam surrounding them in order to achieve proper alignment and were transferred to a hydraulic press, as shown in Figure 2. Figure 2 Schematic illustration for specimen fabrication.

Open image in new window Fig. 3 Specimens' fabrication, concreting and compressive strength test.

Specimens were fabricated using different fabrication parameters and post-deposition annealing temperatures and duration.

In this way the validation performed reflects conditions that may occur in real world use of such a multi-gene assay, in which variations in specimen preparation and microarray fabrication may lead to one or more missing data points per signature.

Implementation of field-compaction control and future analysis of mixtures prepared accordingly was recommended to determine the pattern of vertical AV distribution that should be reproduced in SGC specimens and corresponding modifications required for fabrication of these specimens.

First, solid cube specimens were fabricated; the parts printed along 0° and 45° directions showed more fabrication-induced pores.